How to disassemble phone Samsung u600. Instruction

Phones with moving parts often boast of Waste train connecting these parts. As a result, may be quite different symptoms: the distortion on the screen and the refusal of the upper keys and the camera, until the full non-inclusion.

This model is no exception and today we look at how a few simple techniques can replace the failed train on the phone Samsung U600.

To work needed screwdriver, tweezers, scalpel, solder and a little hard. Proceed ...

1) Open the rear cover and remove the battery pack immediately see the 4 screws marked with red arrows. But there is one screw hidden under a plastic plate, is also indicated by the arrow. (Figure 2, 3) Next, from the end of the bottom of the phone just remove the plastic cover plate and remove the two screws to release the bottom of the body. (Figure 4) Then poddevaya scalpel or just nails (in services for this purpose use mediators to play the guitar) the edges of the shell shoot back. (Figure 5)

2) carefully, using forceps, open the latch and pull plugs plume keyboard module. (Figure 6) after overturn a fee and also with tweezers Heave Conector plume, disconnect it from the board. (Figure 7). Immediately thrown into the eyes of the damaged region plume resulting from the operation, for a part of it cracks (Figure 8)

3) to completely separate the main part of the body from the top, carefully remove the sticker, pried it with a scalpel and as a result of seeing the six screws. They need to be unscrewed, after which the bulk of the body separates from the top. (Figure 9)

at this stage we have got this picture (Figure 10)

4) to dismantle the top, and twisted the two screws marked with red circles, and move the metal cap in the direction indicated by arrows. (Figure 11, 12)

5) unstick a black protective film, and using soldering otpaivaem edge of plume, lifting them with tweezers. Then open the latch connectors and swaying movements pulls a train. (Figure 13, 14)

We can see that train has worn and needs replacing. Visible damage on either side (Figure 15) Install a new tail assembly and the phone is in reverse order.

Free download Samsung U600 flash, schematic diagram, solution, service manual