How to disassemble the Nokia 7500. Instructions

Let's try to examine the main fault, and look how we can disassemble the Nokia 6111.

So, for the work we need to T7 screwdriver, tweezers and mediatr (for guitar). In a more complicated repair will require additional equipment such as Soldering station, but today is not about that ...

1) In order to disassemble the handset, open the back cover, remove the battery pack. They tell us yet do not need. Then, using the Torx T7 unscrews the two screws circled in red.

2) With the help of a mediator (or nails, as anyone handy) release the side latches housing and separate the upper part of the core. It should be done very carefully, because There are displays, glued to the top through the porous pads and if you hurry, sharply pulling the top cover can damage the display.

3) Again, using a screwdriver T7 twisting the four screws circled in red.

4) Gently with the mediator lifts cost from the top of the phone and a slightly moves forward to release the USB and headset.

5) Now we are available to serve the basic units of the phone, namely: - The speaker; - Call (hidden under the plastic bezel housing); - A microphone; - Charge connector. They can be replaced without having deep skills in radioelectronic, while respecting the absolute accuracy.

6) If you need to replace the display, then a sharp object, such as tweezers, remove the metal lid, cover it connector. Then, using the same forceps detach slightly podkovyrnuv up. Follow caution, because train display is very fragile and any wrong move can damage it, and then need change the display as a whole. During closing metal lids be as careful as it contains a ledge, which can pierce the loop. As you can see, remove the display, as well as to establish a new not so difficult.

Free download Nokia 7500 flash, schematic diagram, solution, service manual